Steel plate and sheet
The steel plates, sheets we can produce:
- Hot rolled plates, Cold Rolled sheets
- Spring, carbon and alloy plates
- Carburizing plates
- High-manganese wear-resistant steel sheets
- Chromium heat-resistant sheets, chromium-nickel sheets with aluminum, silicon, molybdenum, titanium additives etc.
- Heat and creep resistant steel sheets
- Stainless, acid-resistant, corrosion-resistant plate, sheets
- Alloy sheets for heat-chemical treatment
- Corrugated Corten sheets resistant to atmospheric corrosion
- Manganese spring sheets, coils
- Chromium-molybdenum sheets
- Steel sheets of duplex type. superduplex
- Chromium-manganese-silicon sheets
- Ferrite and martensitic chromium sheets
- Nitriding sheets
- Tool steel sheets for hot and cold working
- Tool sheets for shallow and deep quenching
- Steel sheets of high-speed steel
- Titanium and titanium alloys sheets
- Nickel plates for low temperature operation
- Boiler sheets for operation at higher temperatures and for pressure equipment, ASTM A387 etc.
- Bearing steel sheets
- Superalloys sheets - nickel, chromium-nickel
- Strip steel, Plate, Sheets of pure iron,
- Hydrogen-resistant sheets at high pressures
- Steel Coils, Hot rolled coils, Cold Rolled coils
Cold-rolled sheets made from Stainless Steel, duplex, Heat-Resistant steel, Quenching and Temperting(QT) steel, Spring steel
- Cold rolled carbon structural alloyed steel sheets 0.5 to 4.0mm thick.
- Formats: width 600 - 1500mm, length 2000 - 6000mm
- Cold-rolled corrosion-resistant, acid-resistant, heat-resistant and stainless steel sheets 0.3 to 15mm thick.
- Formats: width 360 - 2150mm, length 2000 - 8000mm
Surface of cold-rolled, corrosion-resistant, heat-resistant, galvanized sheets |
---|
2D | Pickled | Smooth | With heat treatment |
2B | Straight and pickled | Smoother than 2D |
BA / 2R | Straight and pickled | Mirror + Foil |
2E | Surface without scale | Rough matte |
2C | Surface with scale | Smooth |
Hot-rolled, stainless, boiler, carburizing, wear-resistant, bearing, carbon, tool, high speed plates
- Hot-rolled sheets of carbon steel structural alloy 2 to 600mm thick.
- Formats: width 1000 - 3000mm, length 2000 - 12000mm
- Hot-rolled, corrosion-resistant, acid-resistant, heat-resistant and stainless steel sheets 2 to 200mm thick.
- Formats: width 500 - 2500mm, length 2000 - 12000mm
Surface of hot-rolled, corrosion-resistant and heat-resistant sheets |
---|
1C | Surface with scale | rough | With heat treatment |
1D | Pickled surface |
1E | Surface without scale | No heat treatment |
1U | Surface with scale |
Special surfaces of stainless and acid-resistant sheets available on request.
Special surfaces of corrosion resistant plates |
---|
3N | Sheet sanded with abrasive grain 80-120 |
4N / 4TK | Sheet sanded with abrasive grain 150-400 |
1K / 2K | Sheets polished to a gentle gleam |
1P / 2P | Sheets polished for a mirror effect |
1M / 2M | Decorative sheets |
SB | Brushed sheets |
Cutted elements from sheets/plates by saw, plasma, laser and waterjet
Cut or burned elements of sheet metal |
---|
Gas-plasma cut parts | thickness up to 300mm |
Laser cut parts | thickness up to 30mm< |
Saw cut elements | thickness up to 1000mm |
Water cut elements | thickness up to 150mm |

- rings or discs with a hole burnt from sheets,
- discs, full wheels burnt from sheets,
- Forms, cubes, calcines burnt or cut from sheet metal,
- burnt elements according to technical drawings,
- flat bars cut from steel plates and forged blocks,